Life of Stray Cats Essay

Stray animals like dogs and cats wondering around our neighborhood have become a norm across the globe because they reproduce quickly and uncontrollably. One of the pros of it is that they hardly will be extinct and we will always have our furry friends be around with us. But with only very little pros, it can never out power the cons that strays had to go through. They are always the number one victims of abuse, living in a malnutrition state, and involve in too many accidents and in the end of the day, only a small amount of people actually cares and pay attentions to these helpless animals. We always read articles about stray dogs but how many of us actually remember about stray cats? According to myth, cats have nine lives which makes us think that they are stronger, and can live longer compare to any other animals but as all of us know, it is not true. Cats only have one life just like every other animal. What makes us agree to the myths is because a lot of cats actually look alike, that even if one died, another cat will appear hence we will think it’s the same cats. Stray cats have to go through as much pain as stray dogs. They need to hunt for their own food, digging from one garbage bin to another, attacked by other stray cats, and got injuries all over the body. Worst of all, being abuse by immoral people who splash hot water or slash them without any guilty feelings. Cats also meet with accidents very often due to speeding cars, dark roads where drivers couldn’t see, or unhygienic food that they accidentally eat. They were eventually left to rot or being eaten by other animals such as crows and dogs. Who will actually care for their lives Although it’s impossible for us to adopt every stray cat on the street, but imagine if every family manage to keep a pet cat in their home. That can actually save a lot of their lives. Some might have allergies towards animals but you can still help by providing clean water and some food outside of your house for the cats. This can avoid them from eating poisonous or unhygienic foods and also let them have a healthier life. Last but not least, the best way to avoid over reproduction of strays is by spaying or neutering them. Do not just sit back and watch our furry friends die. One day, they might be gone from the surface of the earth forever. They deserve a second chance too. Start saving and adopting.

Advertising in Outdoor Media

Advertising in Outdoor Media Out-of-home advertising (or outdoor advertising) is made up of more than 100 different formats. Outdoor advertising is essentially any type of advertising that reaches the consumer while he or she is outside the home. This medium is in contrast with broadcast, print, and Internet advertising. Out of home advertising, therefore, is focused on marketing to consumers when they are â€Å"on the go† in public places, in transit, waiting (such as in a medical office), and/or in specific commercial locations (such as in a retail venue).Outdoor advertising formats fall into four main categories: billboards, street furniture, transit, and alternative. Billboard advertising is a traditional out of home advertising format, but there has been significant growth in digital out of home advertising (billboards and place-based networks) in recent years. Traditional roadside billboards remain the predominant form of outdoor advertising. Street furniture is made up of formats such as bus shelters, news-racks, mall kiosks, and telephone booth advertising. This form of outdoor advertising is mainly seen in urban centers.Additionally, this form of advertising provides benefits to communities, as street furniture companies are often responsible for building and maintaining the shelters people use while waiting for the bus. Transit advertising is typically advertising placed on anything which moves, such as buses, subway advertising, truck-side, and taxis, but also includes fixed static and electronic advertising at train and bus stations and platforms. Airport advertising, which helps businesses address an audience while traveling, is also included in this category.Municipalities often accept this form of advertising, as it provides revenue to city and port authorities. Finally, alternative advertising includes ads in stadiums, on gas pumps, bike racks, rest areas, and other non-traditional formats. Alternative advertising provides a way to addres s consumers in places they may not expect. DOOH Digital out-of-home refers to dynamic media distributed across placed-based networks in venues including, but not limited to: cafes, bars, restaurants, health clubs, colleges, arenas, gas stations, and public spaces.DOOH networks typically feature independently addressable screens, kiosks, jukeboxes and/or jumbotrons. DOOH media benefits location owners and advertisers alike in being able to engage customers and/or audiences and extend the reach and effectiveness of marketing messages. It is also referred to as Digital Signage. The reason that this category is growing so rapidly is because busy people are typically busy at home and with the introduction and acceptance of digital video recorders, it has diluted the frequency with which traditional television commercials are viewed.Every day more TV viewers are skipping past commercials with their DVRs which in turn has made out-of-home advertising all the more appealing. A Nielsen media research study in 2009 showed that 91 percent of DVR owners skipped commercials. As a result, traditional TV advertisers are hungry for an effective substitute, and digital out-of-home ads appear to be one of the solutions. DOOH also includes stand-alone screens, kiosks, and interactive media found in public places.The availability of inexpensive LCD screens with built-in media players has opened the door for companies to add interactive video messages in Point of Purchase (POP) Displays. The displays allow consumers to get additional information at the moment of decision on a product or service. Growth in the DOOH industry has been increasing in 2009, with more POP manufacturers, advertisers, and content developers moving to digital. Non-Digital Out-Of-Home Non-digital out-of-home refers to other types of media distributed across physical spaces.These are: Airship Advertising – An airship can provide one of the physically largest out-of-home advertising platforms. Bulletin – Bulletin billboards are usually located in highly visible, heavy traffic areas such as expressways, primary arteries, and major intersections. With extended periods of high visibility, billboard advertisements provide advertisers with significant impact on commuters. Bus advertising – Firmly establish brand awareness and generate quick recall with high profile exposure near point of purchase locations. Commuter rail display – Reaches a captive audience of upscale suburban commuters.Additionally, reaches lunch-time patrons, shoppers and business professionals. ComPark advertising – ComPark is a device used for car park advertising; which is placed onto the parallel lines of a bay and is able to gain instant exposure from motorists that have just parked their vehicle. The ComPark also serves as a guide to assist motorist in adhering to the parking bay size. Lamppost banner advertising – Lamp columns are sited everywhere, allowing advertisers and ev ents to use banners to target precise geographical locations and create massive promotional awareness.Mobile billboard – Mobile billboards offer a great degree of flexibility to advertisers. These advertisements can target specific routes, venue or events, or can be used to achieve market saturation. A special version is the inflatable billboard which can stand free nearly everywhere. This product can also be used for outdoor movie nights. Poster – Target local audiences with these billboards, which are highly visible to vehicular traffic and are ideal for the introduction of new products/services.Marketers use posters to achieve advertising objectives and increase brand awareness by placing multiple units in strategic locations while lowering the cost per thousand impressions. Premier panel – Premiere panels combine the frequency and reach of a poster campaign with the creative impact of a bulletin. Premier square – Bright top and bottom illumination on a premiere panel provide extra impact after dark. Street advertising – The use of pavements and street furniture to create media space for brands to get their message onto the street in a cost-effective approach.Taxi advertising – Taxi advertising allows advertisers to highlight their products, whether brand awareness, or a targeted message, directly to areas where people work, shop, and play. Wallscape – Wallscapes are attached to buildings and are able to accommodate a wide variety of unusual shapes and sizes. These billboard advertisements are visible from a distance and provide tremendous impact in major metro area. Other types of non-digital out-of-home advertising include airport displays; transit and bus-shelter displays; headrest displays; double-sided panels; junior posters; and mall displays.

Speed the Light Charity

Chandler Mann Ms. Girkin 8th period Pre-AP English II 4 May 2012 Speed the Light Speed the Light is a student initiated ministry where students of the Assemblies of God denomination pledge a certain amount of money towards missionary efforts. Ass the year rolls along, the students will pay off the pledges they set. The money the students raise goes to missionaries across the globe. With the different needs and requirements of being a missionary come the expenses (â€Å"What is Speed†).Speed the Light was started in 1944 by a minister named Ralph Harris to let students that didn’t feel like being missionaries help out the efforts to spread the gospel (Speed the Light). Since then speed the Light has grown to be one of the largest church founded charity groups in the world. Although Speed the Light has become so large, it was once an emergency program for war time missionaries. Soon after the organization was founded, World War II was coming to a close. Harris thought tha t that would be a hinge to swing on. Speed the Light took off and the war time missionaries took advantage of the war’s destruction (McGee 218).The influence of the organization sky-rocketed within five years of the war’s end, and Speed the Light’s influence started to grow tremendously. Harris became the godfather of the effort and was commonly seen to be encouraging the late Billy Graham. Billy spread the word of god so much that today he is known as the door to door prophet. Today his efforts have helped not only the vision of Speed the Light, but the enthusiasm of the young teens of the Assemblies of God. Because of these efforts today Speed the Light is more active than ever. In 2009 two siblings of Berryville high school raised a combined total of almost 3,000 dollars.Morgan and Eric Barr spent one whole year alone raising money for Speed the Light. Although they knew that their 1,000 dollar pledges were a massive goal, they did not slack off. Their effort s went towards missionaries in third world countries that haven’t heard the gospel. I also participated as well, raising a hard earned 521 dollars. I can attest to the fact that I have never felt that my money could’ve gone to a better cause. Speed the light is a very renowned organization that has helped missionaries spread the word of god for more than 65 years.Over 7. 6 million people have come to have a lasting relationship with Christ since its start in 1944. Speed the Light is an excellent contributor to the spread of Christianity. I hope they continue to make a difference in the decades to come. They are a shining start in our world of pain and hopelessness. Works Cited People of the Spirit. McGee, Gary B. Springfield, MO. Gospel Publishing House, 2004. Print. About Speed the Light. N. p, n. d. Web. 9 Apr. 2012 â€Å"What is Speed the Light? † Speed the Light. Np, 2012. Web. 19 Apr. 2012

UK PERSONAL STATEMENT(4000 CHARACTERS), TEACHER REFERENCE Essay

UK PERSONAL STATEMENT(4000 CHARACTERS), TEACHER REFERENCE - Essay Example Having successfully completed the International Baccalaureate, a highly demanding and comprehensive course, I hope to continue my academic journey in the field of my interest. Besides textbook learning, IB equipped me with extracurricular skills in three different areas-creativity, action and service, helping me develop as a versatile and a well-balanced individual. The creativity component of CAS was the area that I found most enjoyable and fulfilling. It allowed me to pursue my passion for theatre, consequently obtaining a main role in the Senior School Performing Arts festival. Later I performed in various other festivals such as the Broadway Chorus, the Boarders Play as well as helping out in the middle school house music festivals. During the past two years, I undertook and attended forums on world issues, participated in Model United Nations conferences and debates which helped me foster a deeper understanding of world issues such as poverty, human rights and globalisation. The editorial position with the school magazine also heightened my understanding of teamwork and management. As part of service, I participated in groups such as Amnesty International and Bombs Begone, a charity working to remove the landmines in Cambodia.

Comparing Othello to Genji. What kind of heroes were they What made Essay

Comparing Othello to Genji. What kind of heroes were they What made them different than the heroes that we studied before them - Essay Example This leads him to kill Desdemona, his wife, as well as himself towards the end. (Shakespeare, William) On the other hand, the Tale of Genji, written by Murasaki Shikibu is a masterpiece and great contribution to both Japanese as well as world literature. It has been recalled as one of the first novels ever written in the world, in fiction. It presents a very realistic view of life through the actions and characteristics of a young man by the name of Genji. It has been set during the time of aristocracy in Japan as Genji was the son of an Emperor. It is a play centred around the romantic life that he led with the love of his life, and the complications of societal pressure that are sought upon people with time and human bondage. (Murasaki, Shikibu) The two characters of Othello and Genji have quite a number of similarities and differences between them. They can be compared and contrasted against and with each other on the basis of a number of traits that they possess. Both plays have a background of the main protagonist acting out of the passion of love. Othello was madly in love with Desdemona, and Genji, with Lady Fujitsubo and later Murasaki. However, Othello has been constant in his love for his woman; despite him being posted far away from her,he tried to keep the flame alive within himself, in hopes of soon being able to meet with his Lady love. However, Iago changed his mind with time regarding her character and personality and made him believe that she was indeed a woman that engaged in adultery with other men, and that she could not really love someone. Genji, however, understood love as he matured from a boy to a man. He was first in love with the Lady and this love was forbidden. It made him want it even more and soon she bears his son. In the meantime, he falls in love with a number of different women as he pleases, and seduces a number of them, leading them on and making them believe that they have a shot in being his wife. As compared to Othello, t hus, Genji does not come off as a character that would die for the love of his life during this point in his life. He was a young man who was hell bent on enjoying the frivolous pursuits of life; he proves through Murasaki’s writings that the young royals at the time in Japan had no qualms about whether or not their decisions were affecting other people or the rest of the country, they only wanted to do whatever pleased them, and in this case, it involved randomly involving oneself with different women. Towards the end of both the plays however, both characters witness the emotion and feeling of what death is and how it dawns upon a person when it happens to a loved one. Genji realizes that his true love was only for Murasaki, and when she dies, his memories of her begin to haunt him. He then is able to comprehend how fleeting his entire life was and how easily time just passed him by. He understands that he did not give her enough time even though she was his wife, and that he should have told her that he loved her while he still had the chance. Othello too, was forced by his own emotions to undergo the pain and trauma of the death of a loved one. (Penguin Reading Guides) He was overpowered by the force of his own emotions and feelings to kill Desdemona because he was made to believe that she was having an affair with one of the soldiers in his army. The jealousy that erupts within the man threatens to ruin his life and also subsequently ruins the image of

Individual Reflective Report Essay Example | Topics and Well Written Essays - 1000 words

Individual Reflective Report - Essay Example The report refers to areas the group performed very well while others it required to improve. The plan has ensured that the location and date are secured. In the plan, the venue for the event has been established at the University of Greenwich Council Room. The place has extra benefits it can host all the participants and provide for an allowance for additional participants. The room has also been booked to avoid inconvenience when the event starts. The date has also been set to be held on 10 June 2014, and the event runs from 2-7pm. In addition, all speakers have been contacted to confirm availability. The planners have also obtained catering and accommodation facilities to the participants, who are fifty. The plan has also ensured that there is flexibility in increase in the number of participants and allocated an additional budget of ten people (Bramwell, 1997, p.67), (Allen, 2009, p.180). The plan has also detailed on who is responsible for the budget as GOPIO and the stakeholders. It has established the site of potential expenditure and income, and then they created a framework to monitor the budget. A control mechanism was set maximize revenue but minimize costs. The selection of members was done according to abilities and competence on managing and planning (Ash and Dabija, 2000, p.35). The group initially comprised of inexperienced people that inconvenienced the event planning because the event is large and was a high profile event that required high expertise in planning. However, a selection of experienced group members was made to allow easier planning and members had to resolve their differences in order to continue with the work (Abbott and Geddie, 2000, p.77). In the planning committee, the members acknowledge the importance of unity in the process. A disunited planning committee has conflicts that may lead to the process to collapse (Shone and Parry, 2004, p.7). Group members learn to listen, understand each other, and respect the

Building the Boeing 787 Term Paper Example | Topics and Well Written Essays - 3500 words

Building the Boeing 787 - Term Paper Example The lightness of this Boeing 787 translates into large savings in terms of costs and fuel consumption. In addition to that, the Boeing 787 includes other notable innovations such as state-of-the-art electronics connected to the passenger compartment and to the flight deck, greater headroom, and larger windows. In order to accomplish the building of the Boeing 787, the company had to outsource part of its work (Hill, 2011). This paper will seek to provide the benefits of outsourcing to foreign suppliers and the risks involved in such dealings. To begin with, when a company outsources part of its work to either foreign or local suppliers, it reduces the risks involved in producing the intended materials. Since Boeing was dealing or otherwise gambling with very risky materials, it was a crucial step to have its suppliers manufacture part of the materials on the company’s behalf (McIvor, 2010). Particularly, risks involved in technological complexity are immense and can result to significant meltdown of a company’s resources. It is agreeable that manufacturing aircraft materials especially composite ones is expensive, time consuming, and technological irrational (Sparrow, 2003). Therefore, for Boeing to outsource 70 percent of the total content needed to build the jet to other manufacturers in other countries helped them minimize the risks it would stand to incur in case of mistakes. Therefore, outsourcing helped Boeing share among its suppliers the risks involved manufacturing such materials as well as in the building of such a risky technologically multifaceted aircraft (Brindley, 2005). Outsourcing makes the contracted companies feel being as part of the overall manufacturing process, which in turn brings a sense of contribution and ownership. Research findings show that such a feeling is pragmatic for business support (Hill, 2011). The Boeing’s outsourcing idea was critical. In fact, it made the partners feel included in the

Job Evaluation at Whole Foods Assignment Example | Topics and Well Written Essays - 1250 words

Job Evaluation at Whole Foods - Assignment Example The teams have been clustered into departments and the work is conducted by the team members. The teams need to ensure that successful operations are maintained and thus the teams are profitable to the stores, the communities and the organization. The teams have their own roles and responsibilities at the stores and thus functions as being the part of the bigger teams such as stores. It has been noticed that in the store level there are numerous store teams such as bakery, floral, meat, prepared food, products such as fruits and vegetables, customer service and facilities such as store maintenance and janitorial staff, sea foods, specialty such as cheese and chocolates. The other team members are store team leaders, departmental team leaders, specialized store support, associate store team leaders, specialized team members, associate team leaders and team members. At this instance, it is significant to determine the job titles upon the basis of the information that has been provided. Assigned Titles to Jobs It can be mentioned that Job A required a store manager or more specifically the Chef/ Cook. Job B requires a Customer Service Cashier. Job C requires a Departmental Manager or Prepared Foods Team Leader. Job D requires a Prepared Food Supervisor. Job E requires Prepared Food Dishwashers. Job F requires Overnight Grocery Team Member. Job G requires Specialty Associate Team Leader. Job H requires Associate Store Team Leader. Job I requires Grocery Team Member. Job Structure by Title and Job Letter Job A: Store Manager Job H: Associate Store Team Leader Job C: Departmental Manager Job D: Prepared Food Supervisor Job G: Specialty Associate Team Leader Job F: Overnight Grocery Team Member Job I: Grocery Team Member Job: Customer Service Cashier Job E: Prepared Food Dishwasher Process, Techniques, and Factors Process Followed to Arrive at Job Structure In the hierarchy above, the job that holds the best position in the organization was given the top most priority . Furthermore, on the basis of who reports to whom the rest of the positions have been placed in the hierarchy. Job Evaluation Techniques and Compensable Factors It can be viewed from the above hierarchy that store manager holds the highest position which has been characterized as Job A. Therefore, according to the ranking method, it has been observed that the store manager holds the benchmark job and thus all other jobs will be compared with that of the benchmark job. At the outset, Job H needs to be compared with that of the benchmark job since it lies in the second position of the hierarchy. It has been noted from the case study that the Associate Store Team Leader has to endorse and assist the store team leaders with all the store functions. He is responsible for coordinating and thus supervising the products as well as personnel at the stores. The job of the store manager has been to look after the customer service, pursue and thus fulfill with the health and sanitation procedu res. Store manager needs to perform wider variety of tasks at a time. Therefore, his job has been ranked at the topmost level of the hierarchy. The department manager needs to report to the associate store team leaders as well as to the store team leaders. He tends to manage and supervise the Prepared Food Department. The Prepared Food Supervisor is supposed to perform all the work related to the Prepared Food Team Members. He needs to report

Recycling Tires Research Paper Example | Topics and Well Written Essays - 2000 words

Recycling Tires - Research Paper Example Tire recycling is also referred to as rubber recycling and it is described as the process of recycling used motor vehicle tires that are no longer fit for use on the vehicles as a result of irreparable damage or wear and tear (Schackelford, p. 1555). Due to their nature, tires are taken to be among the largest type of waste that is most problematic to deal with (Price and Edgar, p. 363). Their problematic nature during recycling is also attributed to the fact that they are produced in large volumes because of the high number of motor vehicles on our roads and due to their durability (Oskamp, p. 160). It is because of these same problematic characteristics of tires that make them to be one of the most commonly reused waste items due to the resilience of rubber that makes it suitable for use in other products (Porter, p. 176). This paper will define the problem of tire recycling in society and propose the possible solutions and treatments to the said problem. The Problem of Recycling U sed Tires Recent studies reveal that approximately one tire is disposed off by one person every year (Price and Edgar, p. 363). As seen in this paper, tires are essentially used in every motor vehicle, ranging from trucks, buses, tractors and cars among others. All these different types of motor vehicles make use of at least four tires, all with varying shapes, forms and sizes (Porter, p. 189). When tires are used for a significant period of time, they become naturally worn out due to the friction with the road and other damages such as punctures (Schackelford, p. 1555). This makes the said tires to be unsuitable for use on the motor vehicles and the need to replace them with new ones arises. The problem comes about with the large number of tires that are being disposed on a continuous basis (Carl, p. 98). According to statistics from population census results in different countries, more and more individuals, families and organizations are acquiring motor vehicles at the dawn of ea ch day (Ackerman, p. 57). With each motor vehicle comes at least four tires that will keep the vehicle running for some time and eventually need disposal and replacement because of the wear and tear that they succumb to. Other statistics also reveal that the number of tires being disposed is reaching threatening levels, especially if not disposed well (Burn, p. 612). With the amount reaching as high as 300 million, an alternative solution has to be sought so as to save the environment from the possible dangers that arise from careless disposal of tires (Porter, p. 112). More often than not, especially in the past years, used tires have been disposed by piling them up in yards or unoccupied fields of land. This normally forms a landfill (Porter, p. 115). In the past years, discarded automobile tires used to be discarded in piles that were usually an eyesore to many people (Carl, p. 28). The same tires would also be a problem because of the fire hazard that they brought to the surroun ding environment. This was before many people had taken environmental protection seriously and did not understand the need to dispose off tires properly (Price and Edgar, p. 364). The Environmental Protection Agency in the United States of America reveals that the number of scrap tires that are generated in the United States alone each year is slightly above 290 million (Price and Edgar,

Research Proposal- How Cheesecake Factory extend the overseas' market Proposal

- How Cheesecake Factory extend the overseas' market in China - Research Proposal Example This research proposal focuses on the process of business expansion adopted by American Bakery firm The Cheesecake Factory. The study will mainly reflect on the overseas activities of The Cheesecake Factory in China and the aspects related to the business expansion process. The Cheesecake Factory was established in the year 1975 by Oscar and Evelyn Overton. Initially, it began as a small shop in Detroit and was converted to a cheesecake supplier for the local restaurants (The Cheesecake Factory, 2014). Later on the business was shifted to Los Angles where the suppliers were the given the form of a restaurant 1978 by David Overton. This was the first Cheesecake Factory Restaurant. The initial strategy of The Cheesecake Factory Restaurants was to provide the customers with ultimate dining experience (The Cheesecake Factory, 2014). Presently The Cheesecake Factory is operating with more than 175 restaurants out of which 165 are being operated under its own brand, while 13 restaurants are being operated by Grand Lux Cafà © and one by The Rocksugar Pan (The Cheesecake Factory, 2014). The international expansion process of The Cheesecake Factory began in the 2011 as they expanded into the Middle East by partnering with M.H. Alshaya Co in Kuwait (The Cheesec ake Factory, 2014). This marked the beginning of a new business role for the firm as they started catering their services to the global consumers. In 2013, they extended to the Caribbean by opening a Cheesecake Factory Restaurant in Puerto Rico (The Cheesecake Factory, 2014). Recently, the company has started focusing on the Asian markets for enhancing the scope of growth and development of the firm. The aim of the research is to assess the process of business operations by The Cheesecake Factory in the Chinese market. The study will reflect the various factors that influence the process

Chocolate and Brownies Essay Example for Free

Chocolate and Brownies Essay Baking brownies seems easy enough, but have you ever followed every step on the back of the box and weren’t happy with the outcome? I think we all have done that a number of times. If you want to know how to create the most amazing mouth-watering brownies keep reading. You and anyone who will get the pleasure of enjoying the brownies won’t be disappointed with your new and improved recipe. Start off by making a grocery list to purchase the items you do not have. The main ingredients are as follows: 1 small avocado, 1 cup brown sugar, 1/3 cup pure maple syrup, 2 tbsp sunflower oil, 1 tbsp ground chia seeds, 2 tsp vanilla extract, 2 tsp dark roasted coffee (or instant), 1/3 cup dark chocolate chips, 1 ? cup whole grain spelt flour, ? cup cocoa powder, ? tsp baking powder, ? tsp baking soda, ? tsp Himalayan sea salt. This may seem like an extensive list, but trust me, your taste buds will be going crazy as soon as the first bite is taken. Not only are these brownies going to be a delicious satisfaction to the chocolate craving many of us wish to fulfill, but the actually are not as bad for you as you may think. The ingredients listed substitute a lot of the ingredients in boxed brownies such as oils and eggs which may leave you feeling guilty after indulging. Ok, so as soon as you have the ingredients needed make sure you are working in a clean area. Before mixing the ingredients together preheat the oven to 350F, line an 8† pan with parchment paper, or cover with non-stick spray and set aside. In a large bowl, gently smash the avocado with a fork to break apart followed by a hand mixer (you don’t want any chunks). The avocado is used as a substitute and for texture, not necessarily for flavoring as you’ll notice in the final product you cannot taste it at all. Next, add in the brown sugar, maple syrup, oil, chia, vanilla extract, and coffee; mix this until smooth. Put the large bowl aside and grab a medium one. Sift together the flour, cocoa, baking powder, baking soda, and salt. Slowly add these dry ingredients to the wet mix on low with a mixer, or stir by hand until the dry mix is no longer visible. Stir in the chocolate chips, toss in a few extra if you’d like. Dump the mixture onto the baking pan, the batter will be extremely thick but do not worry, dipping your spatula into cold water will make it easier to spread out the batter. Once your batter is the way you want it to be in the pan, place it in the oven and let it cook for 20-25 minutes and no more. The batter may be giving you mixed signals while cooking, but I know from experience how shocking it is that 25 minutes could cook it thoroughly considering how thick it is first going into the oven. Try not to open the oven too much while it is cooking, only check on it after about 20 minutes. While the brownies are baking is a great time to clean up the bowls and spatula you used. Let them soak in hot soapy water because the batter being so thick takes quite a while scrubbing to be completely clean. Also be careful not to make the water too hot, you don’t want to be dipping your hand into scalding hot water. It’s time! The oven has buzzed and you probably cannot wait to peek at your wonderful brownies. Be sure to get oven mitts to remove the dish from the oven, test the center of the brownies with a fork and as long as it comes out clean they are fully cooked. It should come out clean, but if for some reason it hasn’t put them back in for no longer than 2 minutes. Nothing is worse than an over cooked brownie. Let the brownies cool for 20 minutes before diving in. After the 20 minutes has passed, cut the brownies into the size you desire. I have found a pizza cutter to be the easiest to get through the thick layers of fudge. You’re finished! You have just completed the best brownies you will ever experience in your life. Put a large scoop of vanilla ice cream on top and enjoy! Be sure not to give away your secret to others who will be sure to be envious.

Teachers Day Essay Example for Free

Teachers Day Essay Teachers Day BY Adi001 Teachers Day In some countries, Teachers Days are intended to be special days for the appreciation of teachers. World Teachers Day is celebrated across the world on October 5th[1], with great verve and enthusiasm. Ever since the importance of teachers has been recognized by UNESCO, by adopting the Recommendation concerning the status of teachers, World Teachers Day has been celebrated annually. This includes celebrations to honor the teachers for their special contribution in a particular field area or the community in general. Contents[hide] * History * 2 By country * 3 See also * 4 References * 5 External links I [edit] History The concept of celebrating teachers day originated in India to remember the great educationist Dr Sarvepalli Radhakrishnan. He was one of Indias most influential scholars of comparative religion and philosophy, whose dream was that Teachers should be the best minds in the country. 2] [edit] By country Country I Date of Teachers Day I Notes I Afghanistan I May 24 | Schools have a holiday, but students and teachers gather to celebrate at schools with special traditional food, cookies, music and resents to the teachers I Albania I March 7 | In 1887, the first school which taught lessons in Albanian was opened on this day in the small city of Kor#. I Algeria I February 28 | Argentina I September 11 I To honor the work of Domingo Faustino Sarmiento after he died. I Australia I Last Friday in October I On Australias celebration of World Teachers Day, the NEiTA Foundation and the Australian Scholarships Group (ASG) is proud to announce the national teaching recipients of the ASG Community Merit Awards. World Teachers Day was started by UNESCO and is celebrated in more than 100 countries around the world each year. On its 40th anniversary this year, it represents a significant token of the awareness, understanding, and appreciation displayed for the vital contribution that teachers make to education. I Azerbaijan I October 5 | Between 1965 and 1994, the first Sunday of October. Since 1994, on October 5, it has coincided with the World Teachers Day (est. 1994 by UNESCO). I Bahrain I February 28 | Brunei Darussalam I September 23 | To commemorate the birth date of the 28th ruler of Brunei, Sultan Omar Ali Saifuddien Ill, also known as the Architect of Modern Brunei who amongst others had emphasized on the importance of education to his ubjects by introducing policy of free education whereby the citizens are charged very nominal fees for attending schools. This policy have now been followed by the current 29th ruler who have since extended the policy further. I Bhutan I May 2 | Established and marked on the birth anniversary of the third King of Bhutan, Jigme Dorli Wangchuck, who introduced modern education in the country. I Bolivia I June 6 | Brazil I October 15 | A decree regulating the elementary schools in Brazil. The celebration gained popularity throughout the country, and October 1 5 was officially 0 was chosen to celebrate Teachers Day, because on that day in 1945, the Chilean poet Gabriela Mistral received the Nobel Prize. However, in 1977, the date was changed to October 16, to honor the founding of the Colegio de Profesores de Chile (Teachers College of I China (Hong Kong) I September 10 | Before 1997, Teachers Day was on September 28, following the tradition from the Republic of China since the 1950s. After the handover

Harm Principle Examples

Harm Principle Examples In 1993, Canadian farmer Robert Latimer killed his extremely disabled child by putting her in his truck and running a pipe from his exhaust into the cab. Latimer fully admitted his guilt and claimed that, by killing her, he freed her from her chronic pain due to her severe form of cerebral palsy. His daughter was a full quadriplegic and required numerous surgeries to maintain her quality of life. She could not feed herself and was in constant pain despite painkillers she was given. Despite her condition, she was able to sporadically smile and respond to some stimuli. Later in the year, Latimer was convicted of first-degree murder. A year following this, his sentence was lowered to second-degree murder. Latimer, through many different trials and appeal processes was eventually released in 2008 as he was not deemed a danger to society. His case brought up many questions in regards to the law such as euthanasia, mercy killing and how it would affect other mandatory sentences for murder. The case itself calls to attention an argument made by philosopher John Stuart Mill relating to harm and liberty. He brings to light his harm principle and draws attention as to what liberty should be. In this essay, Mills argument for the harm principle will be explained and evaluated. Firstly, the harm principle needs to be analyzed as well as Mills argument for it. His essay titled On Liberty discusses civil and societal rights. His concern is mainly to do with the right to use methods of control on another person. He believes that the right to control another individual can be rightfully exercised over any member of a civilized community, against his will, is to prevent harm to others (Mill, 1). Essentially, Mill is saying that liberty should not be restricted unless it is to prevent harm to other people. He furthers this argument with saying of over himself, over his own body and mind, the individual is sovereign (Mill, 1). Here, he claims that individuals can essentially do anything to themselves as authority has no say in what  they do to themselves. It is from this phrase that Mill states individuals have the liberty to think and have their own opinions, thoughts, and beliefs regardless if it applies to minority groups or the majority of society. Mill also states with this comment that he believes that individuals should have the right to pursue their thoughts, beliefs, and ideas regardless of how society views it so long as no harm is done to others. He declares that his harm principle and push for personal freedom over societal rule would be beneficial to society as a whole. He explains this by saying that individuals would be happier (Mill, 1) and would feel less oppressed. He further explains this by saying that since individuals would be pursuing their passions, society would spend less time controlling people and enforcing rules. Mill explains that that his doctrine is only meant only to apply to people in the maturity of their faculties (Mill, 1). He is saying here that his set of guidelines cannot apply to people who are not involved members of society and are outside a set of principles he applies to a civilized society (Mill, 1). Civilized society consists of people who can engage in their own interests, skills, and capabil ities but also have had access to an education. He believes that through personal reflection and freedom, an individual will gain a higher level of power to understand his or her surroundings. However, without access to that educational systems and a developed society, individuals will not reach their potential for personal reflection. Mill explains that people who are dependant of others, like children or the mentally challenged, must protected from themselves as they are not capable of maintaining the state of personal reflection Mill requires. He also states the concept of a civilized society much be maintained in order for individual liberty and the harm principle to be effective for society. He explains that freedom of expression and thought is key to avoid social stagnation and that with individuality comes progress. Next, analysis of Mills argument will be done. He brings up some solid points regarding societal progress due to individuality and thought development. Essentially, Mill claims that  individuals learn from their mistakes and it is through this that personal development occurs. Unfortunately, his essay On liberty has gaps in which he is too vague on the limits of liberty. He also is much too vague on his definition of harm. This is due to the fact that he places way too much importance on individual freedoms to maximize happiness and understanding. He does not take into consideration that personal choices regarding an individual can sometimes be harmful to others. The argument of paternalism is a good example of this. Seat belt laws dictate that individuals must wear their belts regardless that they want to or not. The laws are in place in the name of the protection of the individual. With Mills argument, he claims that seat belt laws would be an infringement on personal happiness a nd freedom, regardless of the possibility of injury in an accident. Thus, he does not properly address the issue of an individual making poor choices. To conclude, the case of Robert Latimer was discussed and the momentous exception in law that was done. Through this, the Principle of Harm by John Stuart Mill was explored through its definition in regards to liberty and its link to personal freedom. Also explored was the only circumstance in which Mill believes freedom can be limited: to protect others from harm. Lastly, objections to Mill argument were brought up such as his vagueness in his explanations of liberty and harm as well as its tie to bad personal choices.

Whitman Essay -- essays research papers fc

  Ã‚  Ã‚  Ã‚  Ã‚  Whitman Essay   Ã‚  Ã‚  Ã‚  Ã‚  Love is the greatest gift that God has bestowed upon mankind. Defining love is different for every culture, race, and religion. Walt Whitman’s love is ever changing for anyone who tries to love him or understand his work. Love can be broken down into a multitude of emotions, and feelings towards someone or some object. In order to find love that is searched for, preparations must be made to allow the full experience of Whoever You Are Holding Me Now in Hand by Walt Whitman to be pious. Walt Whitman’s poem is devoted to the fullness of love, and a description of fantasy and reality. A journey to find love starts with knowledge that both participants are willing, and able to consummate their love in judgment under God. Time is the greatest accomplice to justify the energy and sacrifice needed to start developing the ingredients needed for love to grow. Each stanza is a new ingredient to add to the next stanza. Over time, this addition of each stanza wi ll eventually lead to a conclusion. A conclusion that love is ever changing, and people must either change along with love or never know the miracle of love.   Ã‚  Ã‚  Ã‚  Ã‚  Merriam-Webster’s Collegiate Dictionary defines love as a strong affection for another arising out of kinship or personal ties. Love is a journey that begins by building a foundation of trust, commitment, and understanding. The speaker is thorough and demanding to the point that the speaker becomes a faà §ade to keep prospective loves away. Without love as the speaker begins to say life becomes pointless.   Ã‚  Ã‚  Ã‚  Ã‚   Without one thing all will be useless, (Whitman 2) The listener does not comprehend where the speaker is coming from at first. An example of emotions that are ebbing would be the calm before the storm. A nervousness that is powerless to prevent what the inevitable outcome will be. The speaker knows what it would take to mature fully a relationship that love could blossom out of. Unaware is the listener of the intent of the speaker to dishearten any further a seed that never had the chance to amply develop love. Love is funny when it becomes the focal point in a relationship. This time usually comes after the period of adjustment between two people who have decided to further enhance their love experience. Questions begin to a... ...ionships that stay together without love. Everyone should be taught how to search the soul for their emotional state of mind that they are in before they get involved in a relationship. Love, emotions, and relationships should all come with instructions to be read before opening. Walt puts perspective on reality and fantasy when it comes to relationship. The deeper the love is for one another will allow the couple to grow not only physically, but most importantly the couple becomes closer spiritually. Spirituality is the final step in the journey of love. Spirituality takes precedence over every aspect of human nature. That euphoria that is also understood to be the blessings of our Father in Heaven.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Works Cited Baym, Nina. â€Å"The Norton Anthology of American Literature.† Rev. 6 ed W.W. Norton & Company: New York, 2003. Common Questions on Walt Whitman. 2 February 2005 http://guweb2.gonzaga.edu. Poems and Biography by AmericanPoems.com. 2 February 2005 http://www.americanpoems.com. Merriam-Webster’s Collegiate Dictionary. 11th ed. Merriam-Webster, Incorporated: Springfield, Mass, 2003.

Ephedrine: The Weight Loss Wonder Drug? Essay -- Health Diet Papers

Ephedrine: The Weight Loss Wonder Drug An increasing number of people are using products to enhance their diets. A recent estimate indicates, â€Å"Americans are spending some $6 billion annually on nutritional supplements, and the market is growing by 20% every year† (Zahn, 1997). Of these supplements, the increase in herbal remedy use is most dramatic. Zahn holds that the increase can be attributed to the widely held belief that herbal substances are healthy and harmless because of their natural origins (1997). Unfortunately, research on these supplements, herbal or otherwise, has not transmitted to the public as quickly as the diet enhancers themselves. The phenomenon leaves many consumers misguided by skewed advertising and uninformed about the potential risks involved in ingesting these seemingly harmless, over the counter substances. The following is an attempt to look at one particular herbal supplement, Ma-Huang (active ingredient, ephedrine), more critically. THE CLAIMS: What is MaHuang? MaHuang is an herbal supplement found in products such as Metabolife and SoBeTrim, which claim to stimulate weight loss. It is available in the form of a pill, a powder, or a liquid and is often used in combination with other drugs such as caffeine and aspirin. In addition to being used in weight loss supplements, MaHuang is also promoted as â€Å"natural ecstasy† (Theoharides, 1997) and is often abused under this guise. MaHuang as â€Å"herbal ecstasy† is also called ultimate X-phoria or Cloud 9 (Zahn, 1997). What does Ma-Huang (Ephedrine) claim to do? Produces euphoria ! (White, et al 1997) & (Zahn, 1997) Enchances energy levels ! (Zahn, 1997) http:/... ...tp://www.gethuge.net/xen3.htm Bruno, A., Nolte, K.B., and Chapin, J. (1997). Stroke associated with ephedrine use. Neurology, 43, 1313-1316. Carek and Dickerson (1999). Current Concepts in the Pharmachological Management of Obesity. Drugs, 57(6), 883-904. Kreiger, D.R., Daly, P.A., Dulloo, A.G., Ransil, B.J., Young, J.B., Landsberg, L. (1990). Ephedrine, Caffeine and Aspirin Promote Weight Loss in Obese Subjects. Trans Associations of American Physicians, 103, 307-12. Theoharides, T.C. (1997). Sudden Death of a Healthy College Student Related to Ephedrine Toxicity from a Ma Huang – Containing Drink. Journal of Clinical Psychopharmacology, 17(5), 437-8. Zahn, K.A., Raymond, L. L., Purssell, R.A. (1997). Cardiovascular Toxicity after ingestion of Herbal Ecstacy. Journal of Emergency Medicine, 17(2), 289-291.

ADHD in Females Essay -- Attention Deficit Hyperactive Disorder

ADHD in Females Grace is a second grader. She sits quietly with her hand folded in front of her and watches tv. She sees Dumbo and thinks of the stuffed elephant on her bed. She remembers her brother winning it for her at a carnival, where she got to ride a pony and eat cotton candy. A few minutes pass, and Grace has no idea what is happening around her or on the cartoon. She is not worried, because there really isn't a time that her mind is not wandering. Grace is a well mannered little girl, but suffers from Attention Deficit Hyperactivity Disorder (ADHD). Like most girls with ADHD, she is not physically hyperactive like the common misconception of people with ADHD. She represents a quarter of the undiagnosed cases of ADHD in females (1). According to the site "What is ADHD..." to be diagnosed as ADHD, a person must fit at least six of the following hyperactive/ impulsive characteristic: often fidgets with hands or squirms in seat; often leaves seat in classroom or in other situations in which remaining seated is expected; often runs about or climbs excessively in which it is inappropriate (in adolescents and adults, may be limited to subjective feelings of restlessness); often has difficulty playing or engaging in leisure activities quietly; is often "on the go" or often acts as if "driven by a motor" Ã ¡ often talks excessively; often blurts out answers before questions have been completed; Ã ¡ often has difficulty awaiting turn; often interrupts or intrudes on others (e.g. butts into conversations or games) Hyperactivity and impulsiveness are not both needed to be ADHD. An ADHD individual without hyperactivity is interchangably referred to as ADD, which most ADHD females are. Between 3 and 5% of sc... ...Sources 1)What is ADHD?: A General Overview, An extensive and informative site about living with and diagnosing ADHD. http://www.helpforadd.com/over.htm 2) ADDvances in Research on Women with ADD, An interview with Sari Solden, M.S. . http://www.add.org/content/interview/solden1.htm 3) Subtle Brain Circuit Abnormalities Confirmed In ADHD . http://www.kidsource.com/kidsource/content/news/brain_ADHD.html 4) Health- Center.com Information center on various diseases. . http://www.healthguide.com/english/brain/adhd/default.htm 5)The Disability Named ADD A webstie sponsored by C.H.A.D.D. . http://www.chadd.org/fact1-a.htm 6) Feeling overwhelmed, disorganized, scattered? For women with ADD. . http://www.add.org/content/women/addvance.htm 7) Pet Scan of ADHD vs. non-ADHD brains . http://www.healthguide.com/english/brain/adhd/images/petscan2.jpg

Computer Programing Engineering

Why did I choose Computer Programing Engineering major? In today's world there exist all sorts of challenges to excite the keenest minds around its surroundings. To meet these challenges one would have to invent new techniques, new instruments and new approaches, which could easily open windows into the unknown area of nature and lead us to work at frontiers of science and contribute to world stock of knowledge. To compete with these scientific advances, engineering and scientific study are the key elements for a new innovation and research programs.My long term goal was to be a Computer engineer. The guy from a village that no one has heard of and who had to cross various paths and finally made it here and that person is me. This has been my childhood ambition to study for Computer engineer program. As I heard from my high school teachers, XYZ has the finest and excellent Computer engineering program in the country. My dream has certainly come alive; I am still studying and working hard to achieve my childhood dream. XYZ is an exemplary and a top standard university in State. I feel proud to be a student in this university.Before my day at this university, I came to see a significant amount about this field. I spoke with few modern Computer engineers, and asked them questions about their career. After spending time with those engineers, I came to realize that computer engineer are needed for various jobs all around the globe, and the work is tedious but in the end the computer engineers get paid hefty for their works. Most of the time computer engineers deal with designing and manufacturing memory systems, peripheral devices, and central processing units.Computers are part of our daily life. We use them from microwave machines to smart phones and including cars. This creates an enormous eccentric for production and manufacturing of new products all around the world. One of the best examples comes from the Apple Company, each time when a person uses his or her iPhone or iPad they see a little note at the bottom that says â€Å"the product was designed in California and manufactured in China†. This also brings the needs of every computer engineer for various jobs.A computer engineer could work with CAD for an auto company or establish a data room for the government buildings or simply create a website for someone’s needs. I choose Computer engineering as my major for many reasons. First, I am extremely innovative in subjects working with programing and fixing microprocessors, and I also adore in them. Second is due to the benefits of income and the prolonged need of computer engineers everywhere around the world today. After my graduation from here, I am hoping to have a job that will financially take care of me and also excite me every day about my work.I have also planned my goals for upcoming semesters in XYZ Computer program. I am looking forward towards all my classes and its activities and new subjects to study. In orde r to see my future in a better place, I have set my goals towards hard working in my life in here at XYZ, and hoping that after four more years I’ll finally have my goal achieved. Until then, I will keep my mind and body focused to the task at hand, so I have nothing to focus other than my studies. Computer Programing Engineering Why did I choose Computer Programing Engineering major? In today's world there exist all sorts of challenges to excite the keenest minds around its surroundings. To meet these challenges one would have to invent new techniques, new instruments and new approaches, which could easily open windows into the unknown area of nature and lead us to work at frontiers of science and contribute to world stock of knowledge. To compete with these scientific advances, engineering and scientific study are the key elements for a new innovation and research programs.My long term goal was to be a Computer engineer. The guy from a village that no one has heard of and who had to cross various paths and finally made it here and that person is me. This has been my childhood ambition to study for Computer engineer program. As I heard from my high school teachers, XYZ has the finest and excellent Computer engineering program in the country. My dream has certainly come alive; I am still studying and working hard to achieve my childhood dream. XYZ is an exemplary and a top standard university in State. I feel proud to be a student in this university.Before my day at this university, I came to see a significant amount about this field. I spoke with few modern Computer engineers, and asked them questions about their career. After spending time with those engineers, I came to realize that computer engineer are needed for various jobs all around the globe, and the work is tedious but in the end the computer engineers get paid hefty for their works. Most of the time computer engineers deal with designing and manufacturing memory systems, peripheral devices, and central processing units.Computers are part of our daily life. We use them from microwave machines to smart phones and including cars. This creates an enormous eccentric for production and manufacturing of new products all around the world. One of the best examples comes from the Apple Company, each time when a person uses his or her iPhone or iPad they see a little note at the bottom that says â€Å"the product was designed in California and manufactured in China†. This also brings the needs of every computer engineer for various jobs.A computer engineer could work with CAD for an auto company or establish a data room for the government buildings or simply create a website for someone’s needs. I choose Computer engineering as my major for many reasons. First, I am extremely innovative in subjects working with programing and fixing microprocessors, and I also adore in them. Second is due to the benefits of income and the prolonged need of computer engineers everywhere around the world today. After my graduation from here, I am hoping to have a job that will financially take care of me and also excite me every day about my work.I have also planned my goals for upcoming semesters in XYZ Computer program. I am looking forward towards all my classes and its activities and new subjects to study. In orde r to see my future in a better place, I have set my goals towards hard working in my life in here at XYZ, and hoping that after four more years I’ll finally have my goal achieved. Until then, I will keep my mind and body focused to the task at hand, so I have nothing to focus other than my studies.

Job Order Cost Essay

There are two main cost accounting systems used: Job order cost systems and Process cost systems. Both have very distinct differences that help each specialize in a certain type of manufacturing company. The job order cost system in particular is used to â€Å"provide product costs for each quantity of a product that is manufactured. † When a product is called to be manufactured, then it is called a job. Once the job is ordered, the manufacturing company must go through a flow of steps to complete the job. The flow of a job order cost system is as followed: materials, work in progress, finished goods, and cost of goods sold. At the start of the job order cost system is materials. Materials, or more accurately direct materials, are the main items used in building the job. A receiving report must be made when the materials are received and inspected. Once the materials and the receiving report and complete, the materials are written in a journal entry as a debit to â€Å"Materials† and a credit to â€Å"Accounts Payable†. Following the journal entry, a material requisition must be made to properly obtain the materials from the storeroom. Once the materials requisition is received the job process flows to work in process and a journal entry must be made with a debit to â€Å"Work in process† and a credit to â€Å"Materials†. Once the job is in the Work in process stage, the factory labor cost and the hours of labor must be accounted for. Work in process is the step in which the materials are being used by the laborers in order to complete the job. Some companies choose to use clock cards, in-and-out cards, or electronic badges in order to monitor the amount of labor hours have been clocked in. Regardless of the method, the hours must be clocked and multiplied by the rate of pay in order to properly complete the work in process aspect of the job. Once the hours and rates are calculated, a journal entry is written with a debit to â€Å"Work in Process† and a credit to â€Å"Wages Payable†. However, before a job reaches the step, finished goods, another expense must be accounted for. Factory Overhead are all manufacturing cost besides direct labor and direct materials. Since factory overhead costs can’t be pin-pointed to a single job and must be estimated, the costs are allocated amongst the jobs. This process is called cost allocation. In order to estimate the Factory overhead, we use the â€Å"Predetermined Factory Overhead Rate† formula, which is â€Å"Estimated Total Factory Overhead Cost† divided by the â€Å"Estimated Activity Base†. Once the factory overhead rate is determined and the calculations of the hours and the rate are finished, then a journal entry with a debit to â€Å"Work in Process† and a credit to â€Å"Factory Overhead† is recorded. Once all of the costs, debits, and credits are correctly situated in the work in process step, the flow of the job goes to finished goods. Finished goods are the process in the job where the item is completed and ready for sale. Finished goods accounts for the cost data for the units manufactured, units sold, and units on hand. Once a product is sold, the flow of the job reaches its conclusion with cost of goods sold. To record a sale in the journal entry, two entries must be made. First, a debit to â€Å"Accounts receivable† must be written along with a credit to â€Å"Sales†. The second journal entry would include a debit to â€Å"Costs of Goods Sold† and a credit to â€Å"Finished Goods†. An example of how a job order system would flow could be described a table making business. For example, if a customer orders 100 tables, then the table manufacturing company has received a job to make 100 tables. The first step for the company would be to order the materials needed for production of the table. Materials would include the wood, glass, and metal. Next step would be to calculate the cost of the materials. Assuming the company would need 200 logs of wood, 100 beams of metal, and 50 units of glass, they would then multiply the amounts of each material with the single cost of each material. If a log of wood is $10, beam of metal is $15, and a unit of glass is $20, then the direct materials cost is as followed: $10 x 200(wood) + $15 x 100(metal) + $20 x 50(glass) = $4,500. Once the material is ordered and received, someone must inspect the wood, glass, and metal then fill out a receiving report stating the quantity and condition of the materials. Once the materials are correctly accounted for, they are moved to the storeroom. At this stage, the table process is in the work in progress stage. From there, a materials requisition must be sent in order to move the wood, glass, and metal for workers to start making the tables. The amount of hours must be recorded in order to determine the direct labor involved in making the tables. Assume that the amount of hours required to make 100 tables is 300 hours. From there, they would multiply the amount of hours by the rate at which the laborers get paid. Assuming the rate for the laborers is $10 an hour, then the direct labor would be calculated as followed: 300 hours x $10 = $3,000 labor hour cost. Factory overhead must be calculated after calculating the direct labor and direct material cost. Since factory overhead includes all manufacturing cost besides direct materials and direct labor, then it follows that factory overhead includes indirect materials, indirect labor, factory power, and factory depreciation. In order to estimate the factory overhead correctly we must find the factory overhead rate. Assuming the estimated total factory overhead cost is $5,000 and the estimated activity base is 500, then using the predetermined factory overhead rate we can find the following: $5,000(Estimate Factory Overhead Cost)/ 500 (Estimated Activity Base)= $10 Factory Overhead Rate. Then we would find how much factory overhead there actually is. To find the factory overhead, the company must apply the factory overhead rate and multiply it by the number of hours used. Assuming there is 150 direct hours, the following is calculated: 150(hours) x $10 (Predetermined Factory Overhead Rate) = $1,500. Once all of the factors in work in process are settled and completed, a completed table should be finished and thus the job goes to finished goods. Since finished goods is a controlling account, it keeps track of how many units are finished, sold, and are on hand. Once the table is sold, it is transferred from finished goods to cost of goods sold. After the sale, the job order system is complete and so is the job. Job order cost system is a very straight forward system that many manufacturers use for custom orders or batches of items. The system has one path, and ultimately makes for job orders to flow smoothly.

Poli Sci Internet Essay

Deliberative polling, started by James Fishkin, is a process wherein random citizens are invited to deliberate on certain issues before and after education on such issues. After initial polling, these citizens enter into interactions with experts and leaders based on their questions about the issues, and given the same polling questions. The process is recorded and broadcast, in the hopes of reaching viewers to educate them about the issues. Changes in opinion before and after the polling support Fishkin’s stance that citizens are generally uninformed about issues, other than the usual sound-bites. Panel polling describes the act of recruiting panelists—people who specifically reflect opinions of a certain demographic—and polling these panelists on certain issues. The panelist may be compensated for their time or be volunteers. The Internet has changed the face of communication. Forums, which are the Internet’s version of bulletin boards but used for discussions, can bring citizens together to discuss issues. Both deliberative polling and panel polling can be achieved through a forum, where experts and leaders may also visit the site to interact with citizens. E-mail lists may be used for both types of polling, but the e-mail of the participants and their political geographies must be known in order to assess demographics. However, not every citizen uses the Internet, and polling through the Internet may miss large sections of the population. http://cdd. stanford. edu/polls/ – â€Å"Center for Deliberative Democracy† http://www. iht. com/articles/2007/05/27/bloomberg/poll28. php –â€Å"Polling Goes Online, with A Recruited Panel† http://www. mysterypollster. com/main/2005/07/internet_pollin. html — â€Å"Internet Polling: Unfulfilled Promise† 3. Democratic National Party – Leftist/liberal — http://www. democrats. org/ Republican Party—Rightist/conservative — http://www. rnc. org/ Constitution Party—Rightist/conservative — http://www. constitution-party. net/ Green Party—Leftist/liberal — http://www. gp. org/ Libertarian party—Center — http://www. lp. org/ All of these sites have several of the basic choices on the front page: about the party, donation, e-mail lists, get involved, news, key party values, press releases, a blog, and links encouraging citizens to register to vote. The Green, Constitution, and Republican Party, however, lack easy-to-find links so that party members can connect to each other online; the DNP and LP offer links from their front pages to join online groups for those interested in the party. Both the GOP and the DNP do not have information regarding â€Å"becoming a candidate†, while the Green, Constitution, and Libertarian Parties do. Unsurprisingly, because they are the two major parties in the US, both the RP and the DNC offer more material on their websites, such as more details on party organization and leadership. The Libertarian Party has a bit more information than the Green and Constitution Parties. From my perusal of the websites, the Constitution Party’s is the least interactive. There are many informative links, but the only link in which a member might be connected to another member is through the â€Å"Events† link. The Green Party website is similar. The Libertarian Party has a web page devoted to social networks such as Meetup or LinkedIn, the DNP offers its own â€Å"partybuilder† to connect members, and the GOP has a customizable social network â€Å"MyGOP†. It is not whether a party is left or right-leaning that determine the interactivity of its web content, but the party’s size. Larger parties have more members that donate money in order to design, program, and create larger websites that offer more. 4. Although creating any website is relatively easy, it’s not so easy to organize, create, and maintain a large, dynamic website. Any website must offer its customers clarity yet also be informative and not confusing. If the information must look good and be organized, then design and page layout are factors. If interaction is desired, then more programming is needed. In addition, time spent creating a website is money, and larger, more programming-heavy websites do cost more to make and maintain. From the five websites I have browsed, the larger, more detailed websites belonged to the parties who were larger and could raise more money. Therefore I don’t agree with the claim that the Internet levels the playing field between all parties. Furthermore, there are many people in the U. S. who do not have access to the Internet, or who don’t use the Internet for news or video. People who live in remote areas, or are a generation removed from the Internet age, may have difficulties. It may be that some of these people cannot afford Internet access, or cannot access the Internet as easily as others. These people would be harder to reach if parties relied solely on websites to gain their audience. So even with the wide availability, the Internet may still not reach all citizens. However, it is an easy and inexpensive task to simply put up an informative page without the bells and whistles. In this way, the Internet can make the playing field more even. The existence of blogs and online magazines shows this. But I think that the Internet can be used in addition to traditional methods of connecting people—door-to-door, telephone calls, postal mail—in order to make a campaign more effective. The Internet is also a great way to tap into those who do use it day-to-day and are familiar with it. 5. 1. Middleberg Associates surveyed that in 1998, 50% of newspapers were online or had plans to go online. F – the number is 90%. 2. Low costs are the major factor in a news organization’s move onto the Web. –T 3. PoliticsNow was a joint collaboration between NBC News, National Journal, and the Washington Post. – F—It was a joint collaboration with ABC News, not NBC. 4. The most important advantage of online advertising is the ability to target certain aspects of the audience. –T 5. The most common web advertisement is the Flash ad. –F—The most common advertisement is the banner ad. 6. Being able to charge subscribers is a revenue alternative. –T 7. The benefits of charging subscribers outweigh the benefits of free content. –F—When websites charge for their content, traffic decreases. 8. The Wall Street Journal is one of the few newspapers that charge a subscriber base successfully. –T 9. Usually, libraries can use archival databases free of charge. –F—It’s customary for newspapers and magazines to charge libraries to use their archival databases. 10. Three major nontraditional news organizations are The Drudge Report, Salon, and Slate. –T 11. The first big story to break online was regarding the Unibomber. –F—The first big story to break online was Timothy McVeigh’s confession to the Oklahoma City bombing. 12. A common Web-enabled feature is the search engine. –T 13. The first television show with supplementary web content was Who Wants to Be a Millionaire. –F—The show was Survivor. 14. The number of people going online for news rose from 1% in 1995 to 16% by 2002. –T 15. There is no age gap in online news consumers. –F—18- to 29-year-olds go online for news five times that of those over age 65. 6. The 109th Congress passed the most bills in the last ten years (1998-2008). 7. a. List of ways in which the Internet impacts relationship between nations: 1. Communications—people around the world can e-mail each other, and even meet via the Internet, for business, political, or personal reasons. 2. Information—Nations, and regions within nations, can advertise, introduce, or just inform people all over the about their culture and locations. Embassies and consulates have their own websites, and tourism can be influenced by what information people find online. 3. Organization—The Internet can help bring people together and organize them, across country borders. For example, it is possible to access websites from abroad about political candidates in one’s home nation, and meet others in one’s political party despite vast distances. Another example is that a presidential candidate can use the Internet to gather groups of people and organize them. b. List the ways that the Internet impacts the relationships between non-national actors. 1. The Internet makes small communications faster, via e-mail or online messaging, which can be a part of a multi-tasking worker’s day. 2. The Internet is a great tool to bring strangers together for causes or concerns, such as petitions or volunteer polling. 3. News shows often have a supplementary website in which viewers can comment with each other in real-time, such as Cafferty Files.

Course work 2 Essay

Introduction: The dynamics of any industry determine what factors will impact the demand and supply of a particular good or service being bought or sold in that particular market. Some of the major factors that affect the demand for most kinds of products or services include: consumer tastes, income levels, availability of substitute goods and their prices, availability and prices of complementary goods, future price expectations and the general level of literacy of the population and population growth. The other aspect of any market would be the supply side; how do the supply side factors impact the market for goods or services. For instance some major factors include technological advancements, cost of production, the number of suppliers and regulatory framework. A combination of these demand side and supply side factors determines the prices that markets ultimately charge from consumers given that the markets are allowed to function in a free market setting. Technology Market: In particular the Computer Market. When we discuss the computer market in isolation we must understand that it is affected greatly by the overall technology market which plays a critical role in determining which new products and services will be offered by these computers and how will these computers be manufactured in the future. Technology has revolutionized the way we do business and other activities around the world. A significant contribution of technological revolution is the machine we call: a computer. From the time of the first computers and up till today we have witnessed remarkable change. For starters let’s just talk about the change in size of the computers. The point here is that ever since the advent of the computing machine and later the full fledged computer we have since tremendous amount of changes that have occurred along the revolution. These changes have had an impact on both the price of the computer and also on the cost of production of a modern day computer. Demand Side Factors The growth in different technology products such as hand held devices, laptops, desk top computers, I-pods, I-pads, E-books, and PDAs are some examples of what the consumer of today’s world has been buying and accepting for some time. The important factor here is that most technological products are not market oriented rather they are product-led or developed with a perspective of generating enough interest and demand from the market as opposed to the idea of providing products which are required by the market. The demand for computers in specific can be divided into two broad categories firstly the demand from the corporate world or offices and secondly from home users who demand desktops. When companies around the globe started to employ and use desktop computers in the 1980s and 1990s; one could see a revolution taking place that would forever change the workplace. These companies converted there existing manual operations on to computers and resultantly we saw dramatic changes in efficiency levels and the ability of companies to become more productive increased many folds. (Samuelson, 2005) This change in the way companies work led to computers becoming a need for majority of the companies in different sectors such as manufacturing, services and primary related industries. The computers, especially desktop computers had become a necessity for companies by mid-90s and onwards. This factor had made computers an important part of any firms capital requirements. (Samuelson, 2005) As far as the households were concerned computers soon after they were being mass-produced in the 80s become a necessity because of the change in the societal factors and requirements at workplace and schools demanded households to have computers at home. During these similar times (80s and 90s) income levels of the middle class households also increased on yearly basis. This was especially the case in the developing countries such as India, China and Brazil. The income levels were also rising in the developed countries which also warranted the increase in demand for computers. We saw that through the 1990s and 2000s the demand for complementary goods and services to the computers also increased. For instance the internet warranted the need for routers, wireless networks and other devices that were mandatory for office work and households. Similarly camera equipment that could connect them to PCs, mobile cables and other many products and services that were used in conjunction with the PCs were being increasingly demanded. We also saw the strength in the demand for substitutes and a consistent fall in their prices. For example a direct substitute of a computer is a handheld device which could be used for most of the purposes that a computer might offer. Even though these substitutes were available yet people ensured that they have at least one personal computer. This strength in demand is a result of the many features that a computer provides over some of its substitutes such as printing options, scanning, and video conference and so on. These added advantages and features have made computers an absolute necessity for the modern home. Another important factor that has played a critical role in increasing the demand for computers is the future expectations of technology and uncertainty. Because people feel that in the near future more emphasis will be given on efficiency and productivity it is imperative to keep up to date with the present technology. The combination of all these factors have created a scenario where by computers have become a part of the daily life of all individuals of the modern age. The internet has only helped the cause of the computers and we see that computers are an essential part of the workplace as well as the home of a particular individual. Supply-Side Factors The technological leap in the latter half of the last century has changed the way work takes place in a typical office of a manufacturing plant today. The reason is simple: the computer and technologies related to the computer. Not only have computers made it easier for companies to make products faster but they have also made companies more flexible and technology hungry. The supply of computers has been increasing at a great pace not only because of high demand but also due to technological changes that are taking place at all times. Between 1990 and 2002 there was a large decline in the prices of computer chips; this in part explains why computers prices were still falling even though demand continued to rise during that period. An important factor to understand here is that after the initial increases in the demand in the early 90s soon there was a surplus scenario in the chip market secondly, the rapid change in technology meant that older machines were quickly becoming obsolete hence pushing the prices even further down. (Lipsey and Chyrstal, 2007) Source: http://www.oup. com/uk/orc/bin/9780199286416/01student/interactive/lipsey_extra_ch03/page_01. htm In the diagram above we see that the prices of chips continued to fall between 1990 and 2002 except for the 92-95 period when the prices actually went up slightly the reason for the rise could be explained as the shift in the demand curve to the right as a result of the increase in the demand for complementary software that required high speed computer usage during this time; such as multimedia programs or other gaming and educational programs. The decline in the chip prices also explains the fact that cost of production was also declining rapidly during this time and that more and more suppliers of computers were entering the market. This increased competition for customers meant that prices had an even bigger drop. The increased competition also meant that firms that produce computers try to compete on cost as well as brand image. In an overall analysis of the supply-side of the computer and technology market we would say that prices have had a consistent downward pressure because of declining cost of production and a constant and rapid change in technology. There are a number of other important factors such as the availability of other important devices that have caused the prices of computers to fall down such as cheaper motherboards and RAMs. (Lipsey & Chrystal, 2007) Competition is also an important factor in determining the quality and prices of products such as computers. We see that competition has impacted cost of production by a large amount; many firms that manufacture computer and related devices have introduced more and better technologies that are cheaper and faster in processing data. In a lot of ways the market expects and demands computers which are cheaper and faster as we move into the future. This is because businesses and individuals know that computers are meant to reduce the time taken to complete work and achieve this objective in a cost effective way therefore more and more people and businesses demand cheaper computers.

Analysis of the Personality Traits of Steve Jobs

Steve Jobs is arguably one of the most successful CEOs of our times. In his time at Apple and Pixar he has redefined business across the Computing, Music and Mobile communications industries. In spite of being a college dropout he has gone on to become a technology and a business icon. His ability to achieve extraordinary success against tremendous odds makes him an extremely interesting personality to study. Following are his key personality traits. 1)Charismatic Charisma refers to the ability of a person to be able to mesmerise and hold the attention of others. Steve Jobs has charisma in ample abundance. His talks at the annual Macworld Expo have an attendance akin to that of a rock concert. People from all over the world flock in to listen to him for hours together as he delivers his famed talks on technology, innovation and Apple products. 2)Ingenious Ingenious is a rare personality trait that enables an individual to be clever, original and innovative. Prior to the launch of the iPod, the entire industry was looking at desktop publishing and the internet as new sources of revenue. Steve Jobs however was among the few who realised that there was latent demand in the MP3 player segment. He followed up on his insight by launching an iPod which had extremely innovative functions and a unique design. The product captured the attention of the world and along with his other innovation iTunes went on to change the way the world listens to music. Quite clearly he is an ingenious person. 3)Persistent Persistence is the ability of a person to stick to his convictions in spite of huge obstacles. With regard to this an early manager of his had commented that Steve never takes â€Å"no† for an answer For him â€Å"no† is only a comma and never a full stop. He will keep coming back till his objective is achieved. Years later his persistence was in ample display as he stubbornly stood his ground against internal opposition to his unconventional plan to turnaround Apple. 4)Unempathetic Empathy is the ability of an individual to understand Steve Jobs is known for pushing his employees to extreme limits. He is known for firing his employees often in an erratic fashion. This shows that he is unempathetic to people around him.

Stalking Behavior Essay Example | Topics and Well Written Essays - 1000 words

Stalking Behavior - Essay Example Stalking can cause mental and psychological distress to the victims, paralyze professional and social life, with repercussion on health and even raise the incidences of accident and injury. Violent staking behavior can lead to injury and deaths. Legal sanctions by it-self may not be effective in preventing stalking behavior completely. Often the victims is not able to perceive talking behavior, analyze the risk factors, or even acknowledge and cooperate with authorities to stop such behavior. Effective coordination among all including, legal, societal, educational, health care etc is required to counter the problem of stalking. Effective nursing can play an important role in preventing further incidence of stalking and recovery of the victims. Stalking as per the Law on Proscribing Stalking Behavior and Assisting Victims refers to any repetitive conduct, behavior or action where the victims feels stalked harassed or victimized. These can include lurking, following, observing, repeatedly trying to make contact with a person even without his/her consent, not accepting a refusal, harassing or targeting a persons, the persons partner, spouse or relative, silent phone calls, verbal abuse, violent acts against a persons, or anything that annoys, threatens, troubles or defames the persons reputations etc. It has been found that stalking behavior is not restricted to a particular gender but there are greater documented incidences of male stalkers. There are a numerous other behavior that a stalker may resort to. Stalking behavior can vary from mild to serious stalking. It is often difficult to perceive stalking behavior initially. Mild stalking behavior in most cases goes unnoticed. In many cases mild stalking behavior can become more serious over time. In most cases stalking behavior is misleading because stalkers appear harmless at first. Latter on this may transgress to persistent annoyance caused to the

Visit to a place of worship Essay Example | Topics and Well Written Essays - 1000 words

Visit to a place of worship - Essay Example In this way we can ease our minds of anxiety, fear, and care. Although salvation does not depend on going to church, and a Bible is not necessary to get to heaven—a personal interest in Christ is the one thing needful; yet there is no denying that our edification in public worship depends greatly on the kind of prayers that are prayed. for what we require for our physical and spiritual well-being. It is true, as our Lord says, that our heavenly Father knows all our needs before we pray, but he likes to hear us ask him and turn to him with our petitions. The Bible teaches us that â€Å"every good gift and every perfect gift is from above, and cometh down from the Father of lights, with whom is no variableness, neither shadow of turning† (James 1:17). God is the source of every blessing and is unchanging and faithful. Since that is so, then it is clear that we must go to him for what we need, and we may go with confidence for he bids us come, and because we come in the name of his dear Son, Jesus Christ. The church main service started a little bit late than their usual time because there was a baptismal ceremony. For one to qualify to be Baptist in that church, one had to be born again and had to go for a three month course. The pastor said that those who brought their children to be baptised, they brought them as believers. The infants were baptised as the seed of godly parents, and the godparents and parents are exhorted, as believers, to pray that the child may be born again and encouraged to lay hold on the promises made. And as the child of believers, the infant when baptised, is pronounced â€Å"Regenerate†, and thanks are given for it. On that day, I realised that one of the delightful parts of worship is the singing of God’s praises. Praise is different from thanksgiving. We praise God for what he is, holy, almighty, gracious, merciful, wise, all-knowing. These are some of the attributes of God. We praise

Inattentiveness in School Research Paper Example | Topics and Well Written Essays - 1000 words

Inattentiveness in School - Research Paper Example The children going to school are the most affected by inattentiveness especially in cases where they have no option but to strain in order to meet the school requirements in terms of performance. They appear not to react at all to any situation they encounter. They are likely to experience problems when completing tasks (World Health Organization 19). It is evident that such disorders may not easily be noticed until in a later stage of life. The problem if unattended to affects the overall performance and behavioral traits of an individual. They end up lacking non-verbal communication skills as they are not attentive to issues in class from which they are expected to learn how to express themselves. This disorder has made most of the students to take a longer time to learn how to express them as they end up having low self-esteem. Physically, they appear clumsy and less interactive among their peers. Their mod of interaction appears to be an odd one that is observed where they depict specific behavior that appears to be restricted to them. Inattentiveness is caused by a variety of factors and it should not be assumed that it begins in class since there is a possibility that it begins outside the class and only extended to the classroom setting. For instance, when children are taken to the kindergarten, they are very eager to learn only to learn on information they are already aware of. This makes them learn faster than the average learner who needs to repeat several times in order to understand. With time the quick learners become less attentive to what they already know ignoring the new information that is likely to be derived. He average learners, on the other hand, find this to be demanding and brain numbing and with time they also become inattentive.  

Math Problem Speech or Presentation Example | Topics and Well Written Essays - 500 words

Math Problem - Speech or Presentation Example According to the rejection rule, if the value of Z calculated by the test statistic lies in critical area, then we reject the null hypothesis in favour of alternative hypothesis. On the other hand, if the value of test statistic does not fall in critical area then null hypothesis is accepted and alternative hypothesis is rejected. The given test is a left tailed test. The significance value given in the question is 0.05, so the z-score corresponds to 0.05 is -1.645. The critical area for the given testing is the area less than -1.645 or the area left to the -1.645. In the particular z-test, the value of test statistic -1.56 is greater than -1.645, that is why it does not lie in rejection region, so null hypothesis is accepted and alternative hypothesis is rejected. The above test shows that the population mean price for used Motor Bikes at the dealership is $A 20,000. The statistical assessment shows that the sample of 100 used cars has actually helped the manager of the company to determine the actual mean price of used cars in the market. This statistical data analysis can be used in future to determine the potential prices of the cars. In future the manager can use historical pricing data to price the products and it will be recognised as historical based pricing methodology. For example, in future if the manager of Brisbane Motor Bike wants to determine the potential price of its specific model motor bike, he can collect the sample of same model motor bikes from the market and he can determine the potential price for the bike. The price data can be collected from the market. In this way, the manager will not only be able to price his products rightly but he will be also able to keep his prices market competitive, thereby, attracting

Illegal Immigration in the United States Essay Example | Topics and Well Written Essays - 750 words

Illegal Immigration in the United States - Essay Example In order to overcome the problem of illegal immigration and end the suffering that these people go through, it is crucial to come up with legal and lawful solutions that cater for the needs of both the citizens and the immigrants themselves. The biggest cause of illegal immigration into the country reflects at harsh legislation passed into law in the mid 1990s. This law changed the immigration policy by placing immigrants, regardless of their status, at the mercy of the government where they are eligible for mandatory detention without the possibility of presenting their cases to a judge in an attempt to be released from custody (National Immigration Forum). Aside from the provisions of the said law, chances of one being branded as an illegal immigrant are close to none as it is discriminative, and should be among the cases to be reformed in order to cut back on the number of illegal immigrants. This is does not mean that illegal immigration should be encouraged, but laws such as thi s are chief contributors to the case. Moreover, in order to counter the problem of illegal immigrants there exist a need for a strict rules that ensure legal immigration is followed and cuts back on incidences of illegalities. This is against all those people who campaign for lower regulations affecting immigration. To them, implementation of immigration policies should be legally binding and contractual arrangements between the local population and incoming immigrant. This is in an attempt to cut back on illegal immigration into the country and promote the law. In addition, the here exists the argument that having laws immigration curtails on the human right concerning mobility (Hall et al 201). Furthermore, rather than blocking immigration into the country as proposed by liberals, it is crucial to have a form of a framework that caters for the role that immigration plays for citizens. The opposition is based on then regularly increasing numbers of immigrants, both legal and illega l (Hall et al 202). In order to break the standoff between those that are for proper immigration laws and those against the whole concept of immigration, there exist a number of issues at hand. These include individual differences in terms of the immigration status of the person in question. In this case, the status of a single immigrant being illegal does not speak for all immigrants to be illegal. This significant misconception works as a hindrance towards legal immigration. There is also the issue of immigrants who work against fellow immigrants, also known as anti-immigrant immigrants. These are born from the misconception that the original immigrants are superior to those that come after them (Hall et al 202). In the process o curbing illegal immigration there are challenges that lies on the issue of law enforcement and what is expected to enforce federal law. Despite the problem caused by the mid 1990s law, strict laws should be enforced in order to deter and control the influ x of illegal immigrants in the country. These include the law that allows the attorney general to enter agreements with state officers, hence, in order to for the officers to work, as immigration officers or rather execute the functions of an immigration officer (Hawley 28). Through such laws, there has been a downward trend due to regular deportation exercises, and thus there should be more of such. In addition, raids conducted in areas

Report Essay Example | Topics and Well Written Essays - 1250 words

Report - Essay Example All these were visiting artist from Kenya and most off the audience were Africans who had come to enjoy their music. The song that was played is known as Ogallo Nyakalaga. This is from the composition of Suzzana Owiyo who was also the main artist performing the song. It was the first time that the song was being performed and so many people who anxious to know how it would come out since she had talked a lot about it. This was an Afro-fusion song that combined the native Luo songs and instruments and tried to modernize it. Most of the attendees were also from the Luo tribe. The song was written in Native language and so it was hard for me to understand what she was saying but I could tell from the crowd what was going on. The song was also accompanied by the local afro-fusion dance which is a soft simple dance which involves the ladies dancing with the men but no contact is allowed. Afro-fusion music fuses traditional African music with modern music. It tries to make the African musi c modern through the use of modern instruments that were not used before and also through the use of modern dance and words. However most of the other styles of the song remain traditional with differences only coming at some points of the play. Another song that was played is known as Ndoa. The song was from Anayo a local Kenyan musician. The song was a mixed gospel with the lingala genre of music. The composition was from Anayo and the song involves vigorous dances with the dancers jumping up and down sweating. It has a song that was supposed to make the crowd in the party mood and make them feel that they were partying. One characteristic feature of this song is that it is fast and the beats are heard more than the words which were in Swahili. The other song that was played is known as Kisumu City. This song was played to praise the city of Kisumu. The song also had fast beats which were accompanied with the beats from the drum which was supposed to make the audience dance to the m. The dancing was also kind of rough with some men going to the extent of lifting up the ladies up. The guitar was used as an accompaniment in the concert. The guitarist used the technique of going high when the beats were low and sometimes going so low when the beats were high. This created a presence of the guitar in the crowd and made someone notice its presence. The guitar was also used to start the song and every song began with the guitar being played for almost 5 minutes before the other beats were introduced. The high point from my opinion in the performance was when the drums were used to add to the beats of the keyboard. This is when the beats were so high and the crowd also showed by the way that they danced. This was accompanied by low guitar plays and high verbal plays. The performance was good with the mixing of all necessary elements of music that made the night enjoyable. Most of the people who attended the concert looked certified and only few people left the place before the end of the time showing that they liked the performance. The audience also had lots of reaction to the performance by shouting whenever a performance was at its peak and also dancing to the beats of the song with the other dancers and performance. The audience sometimes sang the songs to go with how the performers were singing so that it looked like they already knew the songs. The order of the song was well planned. It started with slow smooth songs with very soft dances but as time went on, the pace of the beats